How to Replace Derby Blades in Your Safety Razor
By Baxter of California™ Official - Baxter Of California | Published: 2026-10-22
Category: How-to Guides
Learn how to safely and easily replace Derby blades in your Baxter of California safety razor. Follow these simple steps for a clean, nick-free shave every time.
Quick answer
To replace Derby blades in your Baxter safety razor, unscrew the handle, remove the old blade, insert a new blade aligned with the posts, and tighten the handle securely. Always handle blades by the edges to avoid cuts.
Why use Derby replacement blades?
Derby blades are made from Swedish stainless steel, perforated and ground with precision equipment. They deliver a close, clean shave and are compatible with your Baxter Double-Edged Safety Razor handle. Each pack contains 20 blades, so you'll have a fresh edge for many shaves.
How to replace Derby blades in your safety razor
- Unscrew the handle: Hold the razor head in one hand and twist the handle counterclockwise until it separates from the head. The blade will be sandwiched between the top cap and the base plate. Do not force the handle if it feels stuck—check if it's cross-threaded.
- Remove the old blade: Carefully lift the old blade by its short edges (never the long cutting edges) and dispose of it in a blade bank or wrapped in paper. Do not toss loose blades in the trash. Always handle used blades by the non-cutting edges to avoid accidental cuts.
- Insert the new Derby blade: Take a fresh Derby blade and align its center slot with the alignment posts on the top cap. The blade should sit flat and centered. Place the base plate over the blade. Make sure the blade is not crooked—misalignment can cause uneven pressure and nicks.
- Tighten the handle: Screw the handle back onto the head by turning it clockwise until snug. Do not overtighten—just firm enough that the blade doesn't shift. Overtightening can warp the blade or damage the threads. Snug is enough.
- Check alignment before shaving: Look at the blade exposure from the side—both edges should extend evenly from the razor head. If one side sticks out more, loosen and realign. A quick visual check prevents an uneven shave and potential razor burn.
Product facts
- DERBY REPLACEMENT BLADES: These replacement blades are made with stainless steel from Sweden, then perforated, hardened and ground using state-of-the-art equipment. This means you get a consistently sharp, durable blade that glides smoothly and reduces irritation.
DERBY REPLACEMENT BLADES
